Linking Engineering to the Shop Floor: A Leading Pump Manufacturer

About the Customer

Leading Pump Manufacturer's pumps and submersible motors used for municipal and industrial water supply and sewage systems, mining applications and offshore platforms. With 280 employees, the customer operates under its parent company and is a leading manufacturer in its market segment, with more than one million pump systems installed worldwide.

Using state-of-the-art design and manufacturing practices, the customerproduces world-class pump systems and replacement parts, and on occasion embarks on spectacular engineering projects. For example, the company produced the world’s largest submersible pump. With a height of 13 meters (43 feet) and a diameter of 1 meter (3.2 feet), this pump is used for the Las Vegas, Nevada municipal water system, delivering water from Lake Mead, the largest reservoir in the United States. In another example, the company secured an order to build the world’s largest subsea drive. With a power capacity of 3,000 kilowatts, it will be used at a depth of around 3,000 meters (9,800 feet) to pump a mixture of gas and oil.

Customer
Leading Pump Manufacturer
Location
United States
Industry
Industrial Machinery
Siemens Logo
Siemens logo

Challenge

The Leading Pump Manufacturer needed a lean, integrated IT foundation to support both small-batch production and one-off, large-scale pump projects, while reducing machining cycle times, improving quality and increasing automation between engineering, NC programming and shop floor execution with limited internal resources.

Solution

IndX supported an integrated PLM-enabled manufacturing approach built around Siemens Teamcenter and NX CAM with Shop Floor Connect, enabling controlled revision management, virtual machining validation, streamlined tool and NC program management and closed-loop feedback between operators and programmers to reduce downtime and prevent costly errors.

Project Activities 

  • Assessed NC programming and cutting tool management needs and defined selection criteria for an integrated CAM and PLM approach
  • Supported CAM system evaluation through benchmarks and vendor comparisons focused on automation, quality and cycle time improvement
  • Implemented a Teamcenter-based PLM environment to manage design, manufacturing and revision data end to end
  • Integrated Solid Edge with Teamcenter to automatically register parts, manage releases and control change processes
  • Connected NX CAM workstations to Teamcenter to manage NC program creation, packaging and release to production
  • Configured post-processors and machining simulation workflows in NX CAM to validate tool paths and reduce collision risk
  • Deployed Shop Floor Connect for Teamcenter to provide role-based access to released work plans, drawings and NC data at the machine
  • Enabled direct NC program transfer from PLM to CNC controllers and supported capture of shop floor optimizations back into Teamcenter
  • Integrated tool pre-setting equipment with Teamcenter to retrieve target values and automatically update measured tool data in shop floor documents
  • Standardized storage of tool lists, setup sheets, work plans and simulation videos within the controlled PLM dataset

Business Drivers 

logo
Reduce machining cycle times and overall production lead time
logo
Improve product quality and minimize manufacturing variation
logo
Increase automation between engineering, NC programming and machining
logo
Reduce machine idle time through faster access to accurate shop floor information
logo
Prevent costly late-stage errors using virtual machining simulation and controlled revisions
logo
Maintain a lean, scalable IT strategy with reliable partner support and easy-to-learn tools

A Vision for Pumps, Supported by IT

To manage a workload that mixes small batch jobs with one-off, large-scale projects, the company must combine engineering efficiency with the highest possible accuracy.

“This requires a lean and integrated process,” says the company’s Manager of IT and Organization. “A mid-sized company such as ours, with limited resources, must implement a long-term strategy – a step-by-step approach over a multi-year timeframe – to establish the necessary IT infrastructure.”

Under his leadership, the company’s IT infrastructure has been constantly evolving and improving. For example, after implementing a new Enterprise Resource Planning (ERP) system, the team was able to retire four legacy systems. In another example, an upgrade from 2D Computer-Aided Design (CAD) to a 3D design process using Solid Edge® software from Siemens Digital Industries improved the efficiency and accuracy of the engineering department.

‍

Extending Improvements to Manufacturing

The next goal was to improve Numerical Control (NC) programming and cutting tool management.

“We have organized all of our technical and commercial systems in such a way that colleagues benefit from the work of others throughout the design-through-production process chain,” says the IT manager. “Therefore, our CAM system selection criteria were heavily focused on the ability to establish a fully integrated process.”

Several Computer-Aided Manufacturing (CAM) systems were evaluated against criteria such as cycle time reduction, quality improvement, user experience and the ability to deliver a higher degree of process automation between engineering, NC programming and shop floor machining.

Twelve vendors submitted quotes and implementation proposals. After detailed presentations from five of them and intensive benchmarks with two solution providers, the company chose the Adanos partner network, led by A+B Solutions. A+B Solutions partners with Siemens and IndX, part of Accenture, to provide solutions such as NX™ software and Teamcenter® software, as well as comprehensive Product Lifecycle Management (PLM) services, including system implementation.

Not only did the functionality of NX CAM and Teamcenter fit the company’s vision, but the way A+B Solutions and IndX understood its needs also inspired confidence in these solutions. Their expertise was clear as early as the implementation proposal, which included streamlining manufacturing planning and shop floor production by integrating Teamcenter (data and process management) with Shop Floor Connect (a web client used on the shop floor to access, manage, view and deliver CNC programs to machine controllers).

‍

An Integrated PLM Environment

Today, when an engineer starts a session in Solid Edge, Teamcenter starts at the same time. Within this PLM environment, every newly created component is immediately registered and managed by the PLM system. All design changes, update notifications and release processes are initiated and carried out automatically. Design and manufacturing revisions are managed and tracked throughout the entire process, from initial design and each design variant through to manufacturing. Standard parts are classified in the library for fast, easy retrieval, and their use is tracked in every design. Finite Element Analysis (FEA) simulations are also saved and managed in Teamcenter.

NC programs are created at two NX CAM workstations connected to Teamcenter. Even the packaging and release of NC data to production is managed by Teamcenter’s manufacturing release process. Using Teamcenter, NC programmers can easily find and select the right tools and clamping devices for each CNC machine in the company’s mixed fleet of machining centers.

NX CAM post-processors, optimized for the SINUMERIK and Eltropilot controllers, generate precise machining data. Before anything runs on the actual machine, every NC program goes through a virtual machining simulation in NX CAM. This lets NC programmers check tool paths in the context of the complete machine assembly, providing comprehensive collision protection. That matters: any damage to the graphite iron parts would delay delivery to the customer by several weeks. Finally, tool lists and set-up sheets are created and stored together with the work plan, detailed drawings, NC data and machining simulation videos.

‍

A Closed-Loop Manufacturing Process

Another important part of the implementation is the seamless transfer of project information from manufacturing planning to production. On the shop floor, PC workstations are connected to one or several machine controls via a serial interface or Ethernet. There, machine operators log into Shop Floor Connect (SFC) for Teamcenter to get role-specific access to released data. For each job, the user sees only the information that is needed. Depending on the job’s complexity, simulation data, CAM parts, CAD models, pictures, videos and work plans can supplement the default NC data, shop floor drawings and tooling sheets.

With one click, the necessary information appears on screen, so operators don’t search in vain. NC programs are transferred directly to the controller at the press of a button. When a program needs minor adjustments or optimization at the machine controller, the operator can easily record the changes, then notify the NC programmer and send the modified program back via Teamcenter. Simple parts are sometimes programmed at the controller. Using Teamcenter for data transfer, these NC sets are registered along with associated information, such as the part and workpiece, which are created automatically.

At the Shop Floor Connect terminal, operators are supported by additional capabilities, such as an NC program editor that compares programs side by side, and powerful search functions.

"Altogether, due to the direct access to PLM information on the shop floor, our machines’ idle times are significantly reduced,” notes the IT manager. “Also, our colleagues are able to effectively minimize variation in quality and manufacturing errors.”

Another PC workstation on the shop floor integrates the tool presetting device into the PLM system. Tool target data is retrieved directly from the Teamcenter database. After the actual tool is measured, its physical characteristics are saved back and automatically noted in shop floor documents such as tooling sheets.

“Shop Floor Connect has been quickly accepted. Today, no machine operator wants to work without such a practical, process-oriented solution,” says the IT manager. “The program performs very well with minimal administrative effort.”

‍

Shop Floor Information within PLM

“In theory, manufacturing information is a natural part of PLM,” says Ralf Stetter, Managing Director of A+B Solutions. “But in reality, only a few companies have actually established the level of integration seen at the manufacturer.”

As the chosen system integrator for A+B Solutions in North America, IndX recognizes this too, and has partnered with Siemens and A+B Solutions to help companies unlock the value of their manufacturing information through PLM. Not every service provider has IndX’s manufacturing knowledge and implementation experience, which is vital to its customers’ success. With the right PLM system bridging engineering and manufacturing, smarter decisions can be made to produce better products.

This mid-sized company established an integrated work environment that ensures a reliable process chain, from design through production. Project cycles became more efficient while staying lean. There was no need to replace two retired NC programmers, and continued business growth now points to hiring more. Throughout, the principles of process reliability and continuous improvement remain uncompromised.

“We are able to identify and fix potential issues much earlier in the process,” says Steeb. “We save a lot of money, because we can avoid finding errors late in the process when they are the most costly to fix.”

Andrea Salerno

PLM Practice Services Director
Andrea has nearly 15 years of experience delivering Industry 4.0 programs across PLM, ERP, and MOM/MES. At IndX, she leads the PLM Practice, bringing deep expertise in Siemens PLM platforms and real-world manufacturing workflows shaped by her background as a design and manufacturing engineer.
talk with our experts
image
We are very happy about our cooperation with IndX, because they understand the processes of mid-sized companies and is immediately available when a problem occurs.